RHEEM HILINE® & PREMIER HILINE®
ROOF MOUNTED SOLAR HOT WATER SYSTEMS
Rheem Hiline® and Premier Hiline® roof mounted systems are a choice of tank and solar collectors installed on the roof, freeing up space on the ground. Our large range of roof top systems offer a choice of Stainless Steel or Vitreous Enamel lined tanks suitable for all your home requirements from the tropics to cold climates.
Rheem offer a choice of four contemporary COLORBOND® steel colours with their modern design roof mounted range. Stainless Steel tanks are lighter in weight and an inherently corrosion resistant material in good water conditions.
Hiline systems are available in 4 Colorbond® colours and have either 5 / 7 / 10 year warranty option – available through your local Rheem Solar Specialist dealer.
In a Hiline open circuit or direct system6, the water from the tank flows into the solar collectors where it is heated and flows back into the tank. Rheem Premier Hiline® system use a closed circuit or indirect system7. The solar heating fluid flows from the heat exchanger into the solar collectors and back again where the heat is then transferred into the water in the tank.
Rheem roof mounted Solar Hot water systems have solar collectors installed on the roof, freeing up space on the ground.
The system that is best for you depends on a variety of factors so it’s important to talk to your local Rheem Solar Specialist about the Rheem solar water heater that is right for you. Rheem Solar Specialists have years of experience and are qualified tradespeople that understand the importance of selling a quality product that is backed by the best after sales service.
Call your local Rheem Solar Specialist and ask them about current trade in promotions and solar rebate incentives. Call 1300 786 747 today.
Features at a Glance
- Available in 180L or 300L capacity
- Stainless Steel or Vitreous Enamel lined tanks4,5
- Four Colourbond colour options
- Full mains pressure from multiple outlets
- Available in Non-Frost or Complete frost protected model options
- Cylinder Warranty of 5, 7 or 10 years4,5
- Booster – your choice of an electric element or 6-Star continuous flow gas boost back up, to keep you in hot water when the sun isn’t shining
- Suitable for 1 to 5 people
- Warranty backed by Rheem Australia Pty Ltd
52H Model Download Specification PDF
52L Model Download Specification PDF
Terms & Conditions:
1. Energy reduction is based on Australian Government Approved TRNSYS simulation modelling on each system model using a medium load in Zone 3 and applies when replacing an electric water heater. Electric boost models only.
2. Any financial savings will vary depending upon type of Rheem Solar system installed, orientation and inclination of the solar collectors, type of water heater being replaced, hot water consumption and fuel tariff. Maximum financial savings off your hot water bill are achievable when replacing an electric water heater on continuous tariff.
3. Eligibility criteria apply.
4. Stainless Steel is not suitable for harsh water conditions. Not available in WA and other locations where water chemistry is a limiting factor. Please see suitability maps. Link: www.solar.rheem.com.au/images/Residential_Stainless_Steel_suitability_map_of_Australia_Nov_2019.pdf
5. Warranty Conditions. See the Rheem warranty set out in the Owner’s Guide & Installation Instructions for each model or view at rheem.com.au/warranty Phone 131 031 for details. Materials and specifications correct as on 1st March 2019. Rheem Australia reserves the right to change product specifications without any prior notification.
6. An open or direct system has potable water flowing through the solar collectors.
7. A closed circuit or indirect system has a non-potable solar heating fluid with anti-freeze properties flowing through the solar collectors.
